Additional Firepower

We crossed our fingers for an all-out test on forced-air cooling. An additional capacitor was placed across the Vmem rails so those little Qimondas get a good deal more clean fun. The Vgpu rail had one too. Sanyo's 6.3V, 1500uF WG fitted the bill for it's low ESR and small size.

I admit, it's not that small after all.

A few extra MHz were squeezed out of the whole setup, while a streamlined Windows XP Professional installation with Forceware 169.21 drivers took over our earlier Vista setup. We prodded the FSB a bit and tweaked out the mipmaps.

And we end off the day with...19643 3DMarks!

1.5V Vgpu, 2.11V Vmem.

Time for some 2560 X 1600 Unreal action! Good luck clocking guys! ;)