To begin the installation, remove the router from the packaging. With the back of the router facing you, screw in the antenna. Then plug in one end of the ethernet cable into your modem and the other end into the WAN port. Then power up the router by plugging the power cable in.

Figure 3: The I/O connections at the rear

The router should look like this after the router is powered up:

Figure 4: Front of the powered router

Now put the CD of the USB adapter into your CD-ROM and install the Drivers and Utility:

Figure 5: SMC Driver/Utility

After installation of the driver/utility, restart your pc.

Step 1

Now your USB adapter should automatically be connected to the Wireless router. Open a Internet Explorer and type in this http://192.168.2.1 to access the router configuration page.

Figure 6: Login Page